Windows 2000 -- Asiliant Driver Installation Procedure
                     for Chips And Technologies hardware.
   --------------------------------------------------------------------------  


        Click the "Start" button, then select the "Settings" tab and click on
        "Control Panel".
	
        Click on the "Display" icon to start the Display Properties window.
	
	Click on the "Settings" tab, and then click on "Advanced..." button.

        Select the "Adapter" tab, then the "Properties" button found there.

        Select the "Driver" tab, then the "Update Driver..." button.

        Select the radio button that begins "Display a list of the known..."
        and press the "Next" button.

        Click the "Have Disk..." button and select the location of the
        driver files.

        Make a selection from the list provided, and click "Next".

        You may need to shutdown and reboot the system for the changes to
        take effect.

	When the system has restarted, the default graphics mode ( usually
	640x480x256color ) has been automatically selected. 



To change the display resolution and/or colors...
-------------------------------------------------
        Click the Start button, then go to Settings and click on Control Panel.
	
        Click on the Display icon to start the Display Properties window. 
	
	Click on the Settings tab.
	
	A new screen setting can be selected using either of the following
        methods:

          1:  Use the slide-bar in the Desktop Area to select new setting.
	    
	  2:  Click on List All Modes. From the list provided, select a new  
	      setting, then click OK or press enter.
	      
	      
        Click the Apply button to make changes.