µVision3 Build Log
Project:
C:\ADuC7XXXV0.1\ADuC7023\Code\Realview\Flash\Flash.uv2
Project File Date:  09/18/2009

Output:
Build target 'Target 1'
compiling irq_arm.c...
assembling ADuC702x.s...
compiling Flash_Protect.c...
linking...
Program Size: Code=1224 RO-data=32 RW-data=24 ZI-data=1760  
FromELF: creating hex file...
"Flash.axf" - 0 Error(s), 0 Warning(s).
Load "C:\\ADuC7XXXV0.1\\ADuC7023\\Code\\Realview\\Flash\\Flash.AXF" 
VTarget = 3.300V
Info: TotalIRLen = 5, IRPrint = 0x11
Info: Found ADuC7023 device with ARM7TDMI-S core. Enabling ARM core.
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: TotalIRLen = 5, IRPrint = 0x11
Info: Found ADuC7023 device with ARM7TDMI-S core. Enabling ARM core.
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Core does not stop after Reset, setting WP to stop it.
***JLink Warning: PC of target system has unexpected value of 0x0008037C after reset.
DLL version V4.08b, compiled Jun 30 2009 19:10:31
Firmware: J-Link ARM V7 compiled Jun 30 2009 11:05:27
Hardware: V7.00
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 2 JTAG devices, Total IRLen = 9:
 Id of device #0: 0x4F1F0F0F
 Id of device #1: 0x028011CB
ARM7 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 5, IRPrint = 0x11
Info: Found ADuC7023 device with ARM7TDMI-S core. Enabling ARM core.
Info: TotalIRLen = 9, IRPrint = 0x0011
JTAG speed: 750 kHz
Full Chip Erase Done.
Programming Done.
Verify OK.