µVision3 Build Log
Project:
C:\ADuC7XXXV0.1\ADuC702x\code\RealView Code examples\VarPlace\VariablePlacement.uv2
Project File Date:  12/05/2008

Output:
Build target 'Variable Placement RealView Debugger'
compiling VariablePlacement.c...
compiling Syscalls.c...
compiling serial_for_RV.c...
assembling startup_RV.s...
compiling irq_arm.c...
linking...
Program Size: Code=4512 RO-data=392 RW-data=52 ZI-data=2004  
".\Output\RealView\Debug\VariablePlacement.axf" - 0 Error(s), 0 Warning(s).
Load "C:\\ADuC7XXXV0.1\\ADuC702x\\code\\RealView Code examples\\VarPlace\\Output\\RealView\\Debug\\VariablePlacement.AXF" 
VTarget = 3.319V
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
Info: RTCK seems to be bridged with TCK
Info: Auto JTAG speed: 8000 kHz
Info: Core does not stop after Reset, setting WP to stop it.
***JLink Warning: PC of target system has unexpected value of 0x000802F8 after reset.
DLL version V4.08b, compiled Jun 30 2009 19:10:31
Firmware: J-Link ARM V7 compiled Jun 30 2009 11:05:27
Hardware: V7.00
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 1 JTAG device, Total IRLen = 4:
 Id of device #0: 0x3F0F0F0F
ARM7 identified.
JTAG speed: 8000 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
JTAG speed: 750 kHz
Full Chip Erase Done.
Programming Done.
Verify OK.