µVision3 Build Log
Project:
C:\ADuC7XXXV0.1\ADuC706x\code\RealView\RamFunction\RamFunction.uv2
Project File Date:  11/26/2007

Output:
Build target 'Target 1'
assembling ADuC706x.s...
compiling Flash.c...
Flash.c(54): warning:  #111-D: statement is unreachable
compiling irq_arm.c...
compiling RAM.c...
compiling serial.c...
compiling Syscalls.c...
linking...
Program Size: Code=1028 RO-data=32 RW-data=28 ZI-data=1764  
"RamFunction.axf" - 0 Error(s), 1 Warning(s).
Build target 'Target 1'
assembling ADuC706x.s...
compiling Flash.c...
Flash.c(54): warning:  #111-D: statement is unreachable
compiling irq_arm.c...
compiling RAM.c...
compiling serial.c...
compiling Syscalls.c...
linking...
Program Size: Code=1028 RO-data=32 RW-data=28 ZI-data=1764  
"RamFunction.axf" - 0 Error(s), 1 Warning(s).
Load "C:\\ADuC7XXXV0.1\\ADuC706x\\code\\RealView\\RamFunction\\RamFunction.AXF" 
VTarget = 3.306V
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
Info: RTCK seems to be bridged with TCK
Info: Auto JTAG speed: 8000 kHz
Info: Core does not stop after Reset, setting WP to stop it.
***JLink Warning: PC of target system has unexpected value of 0x0008025C after reset.
DLL version V4.08b, compiled Jun 30 2009 19:10:31
Firmware: J-Link ARM V7 compiled Jun 30 2009 11:05:27
Hardware: V7.00
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 1 JTAG device, Total IRLen = 4:
 Id of device #0: 0x3F0F0F0F
ARM7 identified.
JTAG speed: 8000 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
JTAG speed: 750 kHz
Full Chip Erase Done.
Programming Done.
Verify OK.