µVision3 Build Log
Project:
C:\ADuC7XXXV0.1\ADuC7122\Code\REALVIEWexamples\UART\UART.uv2
Project File Date:  08/10/2009

Output:
Build target 'Target 1'
compiling UART.c...
UART.c(97): error:  #20: identifier "COMIID" is undefined
compiling irq_arm.c...
assembling ADuC7122.s...
Target not created
Build target 'Target 1'
compiling UART.c...
compiling irq_arm.c...
assembling ADuC7122.s...
linking...
Program Size: Code=2084 RO-data=32 RW-data=28 ZI-data=1828  
"UART.axf" - 0 Error(s), 0 Warning(s).
Load "C:\\ADuC7XXXV0.1\\ADuC7122\\Code\\REALVIEWexamples\\UART\\UART.AXF" 
VTarget = 2.439V
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
Info: RTCK seems to be bridged with TCK
Info: Auto JTAG speed: 8000 kHz
Info: Core does not stop after Reset, setting WP to stop it.
***JLink Warning: PC of target system has unexpected value of 0x000801EC after reset.
DLL version V4.08b, compiled Jun 30 2009 19:10:31
Firmware: J-Link ARM V7 compiled Jun 30 2009 11:05:27
Hardware: V7.00
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 1 JTAG device, Total IRLen = 4:
 Id of device #0: 0x3F0F0F0F
ARM7 identified.
JTAG speed: 8000 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
JTAG speed: 750 kHz
Full Chip Erase Done.
Programming Done.
Verify OK.